Circularly permuted lumazine synthase twisted tube with no gap between between double strands
ELECTRON MICROSCOPY
Starting Model(s)
| Initial Refinement Model(s) | |||
|---|---|---|---|
| Type | Source | Accession Code | Details |
| experimental model | PDB | 1HQK | |
| Sample |
|---|
| Circularly permuted lumazine synthase twisted tube with no gap between double strands |
| Specimen Preparation | |
|---|---|
| Sample Aggregation State | HELICAL ARRAY |
| Vitrification Instrument | FEI VITROBOT MARK IV |
| Cryogen Name | ETHANE |
| Sample Vitrification Details | |
| 3D Reconstruction | |
|---|---|
| Reconstruction Method | HELICAL |
| Number of Particles | 208379 |
| Reported Resolution (Å) | 2.44 |
| Resolution Method | FSC 0.143 CUT-OFF |
| Other Details | |
| Refinement Type | |
| Symmetry Type | HELICAL |
| Axial Symmetry | C1 |
| Axial Rise | 19.8 |
| Angular Rotation | 57.7 |
| Axial Symmetry | C1 |
| Axial Rise | 19.8 |
| Angular Rotation | 57.7 |
| Axial Symmetry | C1 |
| Axial Rise | 19.8 |
| Angular Rotation | 57.7 |
| Map-Model Fitting and Refinement | |||||
|---|---|---|---|---|---|
| Id | 1 (1HQK) | ||||
| Refinement Space | REAL | ||||
| Refinement Protocol | RIGID BODY FIT | ||||
| Refinement Target | |||||
| Overall B Value | |||||
| Fitting Procedure | |||||
| Details | Initial fitting was done using ChimeraX. Flexible fitting was done using Isolde. | ||||
| Data Acquisition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Detector Type | GATAN K3 BIOCONTINUUM (6k x 4k) | ||||||||
| Electron Dose (electrons/Å**2) | 42.44 | ||||||||
| Imaging Experiment | 1 |
|---|---|
| Date of Experiment | |
| Temperature (Kelvin) | |
| Microscope Model | TFS KRIOS |
| Minimum Defocus (nm) | 900 |
| Maximum Defocus (nm) | 1500 |
| Minimum Tilt Angle (degrees) | |
| Maximum Tilt Angle (degrees) | |
| Nominal CS | 2.7 |
| Imaging Mode | BRIGHT FIELD |
| Specimen Holder Model | FEI TITAN KRIOS AUTOGRID HOLDER |
| Nominal Magnification | |
| Calibrated Magnification | 105000 |
| Source | FIELD EMISSION GUN |
| Acceleration Voltage (kV) | 300 |
| Imaging Details |
| EM Software | ||
|---|---|---|
| Task | Software Package | Version |
| PARTICLE SELECTION | cryoSPARC | 4.4.1 |
| IMAGE ACQUISITION | EPU | 2.10.0.1941REL |
| CTF CORRECTION | cryoSPARC | 4.4.1 |
| MODEL FITTING | UCSF ChimeraX | 1.7 |
| MODEL FITTING | ISOLDE | 1.7 |
| INITIAL EULER ASSIGNMENT | cryoSPARC | 4.4.1 |
| FINAL EULER ASSIGNMENT | cryoSPARC | 4.4.1 |
| CLASSIFICATION | cryoSPARC | 4.4.1 |
| RECONSTRUCTION | cryoSPARC | 4.4.1 |
| MODEL REFINEMENT | PHENIX | 1.20.1-4487 |
| Image Processing | ||||
|---|---|---|---|---|
| CTF Correction Type | CTF Correction Details | Number of Particles Selected | Particle Selection Details | |
| PHASE FLIPPING AND AMPLITUDE CORRECTION | 1620295 | Filament tracing | ||
