Lysozyme structure solved from serial crystallography data collected at 100 Hz with JUNGFRAU detector at MAXIV
Serial Crystallography (SX)
Starting Model(s)
| Initial Refinement Model(s) |
|---|
| Type | Source | Accession Code | Details |
|---|
|
experimental model | PDB | 6G8A | |
Crystallization
| Crystalization Experiments |
|---|
| ID | Method | pH | Temperature | Details |
|---|
| 1 | SMALL TUBES | 3 | 293 | 22% NaCl, 6.4% polyethylene glycol 6000, 80 mM sodium acetate, pH 3.0 |
| Crystal Properties |
|---|
| Matthews coefficient | Solvent content |
|---|
| 2.04 | 39.7 |
Crystal Data
| Unit Cell |
|---|
| Length ( Å ) | Angle ( ˚ ) |
|---|
| a = 79.06 | α = 90 |
| b = 79.06 | β = 90 |
| c = 38.26 | γ = 90 |
| Symmetry |
|---|
| Space Group | P 43 21 2 |
|---|
Diffraction
| Diffraction Experiment |
|---|
| ID # | Crystal ID | Scattering Type | Data Collection Temperature | Detector | Detector Type | Details | Collection Date | Monochromator | Protocol |
|---|
| 1 | 1 | x-ray | 293 | PIXEL | PSI JUNGFRAU 4M | | 2021-12-02 | M | SINGLE WAVELENGTH |
| Radiation Source |
|---|
| ID # | Source | Type | Wavelength List | Synchrotron Site | Beamline |
|---|
| 1 | SYNCHROTRON | MAX IV BEAMLINE BioMAX | 0.826569 | MAX IV | BioMAX |
Serial Crystallography
| Sample delivery method |
|---|
| Diffraction ID | Description | Sample Delivery Method |
|---|
| 1 | High viscosity Extruder | injection |
| Data Reduction |
|---|
| Diffraction ID | Frames Indexed | Crystal Hits | Frames Indexed | Latices Merged |
|---|
| 1 | 55298 | | 55298 | |
Data Collection
| Overall |
|---|
| ID # | Resolution (High) | Resolution (Low) | Percent Possible (Observed) | CC (Half) | Net I Over Average Sigma (I) | Redundancy | Number Reflections (All) | Number Reflections (Observed) | Observed Criterion Sigma (F) | Observed Criterion Sigma (I) | B (Isotropic) From Wilson Plot |
|---|
| 1 | 1.6 | 55.9 | 100 | 0.998 | 10.6 | 687.3 | | 30616 | | | 22.36 |
| Highest Resolution Shell |
|---|
| ID # | Resolution (High) | Resolution (Low) | Percent Possible (All) | Percent Possible (Observed) | CC (Half) | Mean I Over Sigma (Observed) | Redundancy | Number Unique Reflections (All) |
|---|
| 1 | 1.6 | 1.66 | 100 | | 0.474 | 1.1 | 469.2 | |
Refinement
| Statistics |
|---|
| Diffraction ID | Structure Solution Method | Cross Validation method | Resolution (High) | Resolution (Low) | Cut-off Sigma (F) | Number Reflections (Observed) | Number Reflections (R-Free) | Percent Reflections (Observed) | R-Factor (Observed) | R-Work (Depositor) | R-Work (DCC) | R-Free (Depositor) | R-Free (DCC) | Mean Isotropic B |
|---|
| X-RAY DIFFRACTION | MOLECULAR REPLACEMENT | FREE R-VALUE | 1.6 | 9.93 | 1.35 | 16445 | 818 | 99.99 | 0.1666 | 0.1654 | 0.17 | 0.1897 | 0.19 | 27.75 |
| Temperature Factor Modeling |
|---|
| Anisotropic B[1][1] | Anisotropic B[1][2] | Anisotropic B[1][3] | Anisotropic B[2][2] | Anisotropic B[2][3] | Anisotropic B[3][3] |
|---|
| | | | | |
| RMS Deviations |
|---|
| Key | Refinement Restraint Deviation |
|---|
| f_dihedral_angle_d | 14.6582 |
| f_angle_d | 0.9099 |
| f_chiral_restr | 0.0572 |
| f_plane_restr | 0.0105 |
| f_bond_d | 0.0064 |
| Non-Hydrogen Atoms Used in Refinement |
|---|
| Non-Hydrogen Atoms | Number |
|---|
| Protein Atoms | 1001 |
| Nucleic Acid Atoms | |
| Solvent Atoms | 93 |
| Heterogen Atoms | 11 |
Software
| Software |
|---|
| Software Name | Purpose |
|---|
| PHENIX | refinement |
| CrystFEL | data reduction |
| CrystFEL | data scaling |
| PHASER | phasing |
